Do you need bath re-enamelling or bath resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. With Surface Doctor Leek, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Contact me today to discuss how I can help with your bath restoration.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. During re-enamelling, I’ll fix any chips or scratches so the new enamel will create a smooth, perfect surface. I resurface all types of baths including cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. I offer a 12-month guarantee on my bath resurfacing services.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. It’s not easy to dispose of an old bath, especially depending on its material. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Metal baths are usually original features of older houses, and they will last for decades! Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is severely chipped or dented, I’ll repair these imperfections first to ensure a flawless surface for resurfacing. There are no extra charges for this step; it’s all part of the resurfacing process. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Leek.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. I’ll sand down the top surface of your bath, stripping it back to the metal. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. I will then apply another layer of bonder over this. 5. At this stage, I will apply a new enamel coating to your bath. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
It usually takes 5-7 hours to resurface or re-enamel a bath. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This step is crucial to ensure the surrounding areas remain undamaged. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. Re-enamelling your bath will restore it to a like-new appearance and feel.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. I address all chip, crack, and scratch repairs as part of the bath resurfacing process.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
How durable is bath re-enamelling?
The new surface of your bath will last for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. All of my work is guaranteed for 12 months for your peace of mind.
1) Give me a call for my expert advice.
2) Send over pictures of the damage.
3) I’ll send your quote to you right away.
That’s all there is to it! I can handle all your repair needs in Leek.
Surface Doctor Leek is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0121 673 8007
I'm ready to help you with your bath and sink repairs in your bathroom and kitchen. You can count on me to produce the best repair out there. Call me today if you have any enquiries about what I can repair.
We serve Leek and the surrounding areas of Staffordshire. Our team is local and ready to help with your repair.
