Is your bath in need of re-enamelling or resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! Here at Surface Doctor Herne Bay, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Give me a call now to learn more about how I can restore your bath to its best condition.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. No need to change your bath installation, as all work is completed directly in your bathroom. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. I offer a 12-month guarantee on my bath resurfacing services.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. Removing an old bath isn’t as simple as it may seem. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. While acrylic baths are much lighter and can be carried out more easily, it will still cause damage to the rest of your bathroom if you have it removed. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are a lasting feature of older homes, providing durability for decades. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Though acrylic baths have a shorter lifespan than metal baths, resurfacing restores them to a like-new condition. For individual repairs like chips and scratches, I color match the repair to your bath, but with re-enamelling or resurfacing, I use a fresh white enamel to respray the entire surface.
The materials I use to resurface your bath are professional grade that are only available on a commercial basis. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. Repairs to chips and dents are included in the resurfacing service with no additional cost. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Herne Bay.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. I will now spray the new enamel surface onto your bath. 6. I will then buff this down to make it super shiny. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
It usually takes 5-7 hours to resurface or re-enamel a bath. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. Masking and protection are vital to ensure no damage occurs to your bathroom. Before spraying the new enamel, any chips and dents need to be repaired to ensure a flawless finish. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. When you have your bath re-enamelled, it will look and feel like a brand new bath again.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. Choosing to repair and restore your bath means you're contributing less to landfill waste. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
I use top-quality materials that guarantee superior results, unlike anything you can achieve with DIY products from a local store. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
What is the expected longevity of a bath re-enamelling?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Reach out for my professional opinion.
2) Send over pictures of the damage.
3) I'll get your quote sent out to you then and there.
That’s how easy it is! I can support you with all your repair needs in Herne Bay.
Call Surface Doctor Herne Bay for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0345 017 0787.
I'm ready to help you with your bath and sink repairs in your bathroom and kitchen. You can count on me to produce the best repair out there. Call me today if you have any enquiries about what I can repair.
We serve Herne Bay and the surrounding areas of Kent. Our team is local and ready to help with your repair.
