Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Gateshead, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Contact me today to discuss how I can help with your bath restoration.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I can resurface all cast-iron and metal baths, and also acrylic baths. The entire procedure takes just one day, making it a quicker and more affordable option than replacing your bath. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. It’s not easy to dispose of an old bath, especially depending on its material. Cast-iron baths are extremely heavy and must be broken apart for removal, which often results in damage to your bathroom. While acrylic baths are much lighter and can be carried out more easily, it will still cause damage to the rest of your bathroom if you have it removed. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. When you choose to restore your bath you are choosing the most environmentally friendly option as you won't be contributing to the vast amount of construction waste that gets produced on a daily basis. Metal baths are usually original features of older houses, and they will last for decades! When their surface becomes dull and tired, chipped, scratched, etc, it is so easy to resurface them so they look brand new again and you'll have a perfect and strong bath in no time. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
I use commercial-grade materials to resurface your bath, which are not available to the general public. You simply can't just use normal white paint to paint the surface. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. You won’t incur extra costs for this step—it’s included in the resurfacing service. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Gateshead.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. I will then apply another layer of bonder over this. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. Next, I’ll buff the surface to a high shine. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. Masking and protection are vital to ensure no damage occurs to your bathroom. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
With years of experience in bath resurfacing, I can restore your bath to its original condition. After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
What’s the lifespan of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. All of my work is guaranteed for 12 months for your peace of mind.
1) Contact me for my expert insight.
2) Send over pictures of the damage.
3) Your quote will be sent to you immediately.
It’s that easy! I can assist with all your repair needs in Gateshead.
As one of the top hard surface repair companies in Gateshead, call me now at 0161 931 9118 if you need bath repairs.
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
