Does your bath need resurfacing or re-enamelling? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. At Surface Doctor Formby, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. I offer a 12-month guarantee on my bath resurfacing services.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. With baths, it's actually not that easy to get rid of the old one. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. While acrylic baths are much lighter and can be carried out more easily, it will still cause damage to the rest of your bathroom if you have it removed. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are usually original features of older houses, and they will last for decades! When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
The materials I use for bath resurfacing are professional-grade, specifically sourced for commercial applications. You simply can't just use normal white paint to paint the surface. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
If your bath is severely chipped or dented, I’ll repair these imperfections first to ensure a flawless surface for resurfacing. This is all included in the process and there won't be any extra charges for this. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Formby.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. I will now spray the new enamel surface onto your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
It usually takes 5-7 hours to resurface or re-enamel a bath. Protecting the surrounding areas by masking is an important step that takes time to ensure no overspray damages surfaces. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
How long will a bath re-enamelling last?
The restored surface of your bath will remain in excellent condition for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Call me today for my expert evaluation.
2) Send in pictures of the damage.
3) I'll get your quote sent out to you then and there.
It’s that easy! I can assist with all your repair needs in Formby.
If you need bath repairs, Surface Doctor Formby is one of the leading companies in your area—call me today at 0161 931 9118.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Formby and the surrounding areas of Merseyside. Our team is local and ready to help with your repair.
