Do you need bath re-enamelling or bath resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. With Surface Doctor Ellesmere Port, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Get in touch now to see how I can help restore your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. The process is carried out directly in your bathroom, so no disruption to your bath installation or plumbing. The special enamel I use hardens and cures in 24 hours, ensuring your bath is ready for use the following day. I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. My resurfacing service is suitable for cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. You can trust my bath resurfacing, which comes with a 12-month guarantee.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. With baths, it's actually not that easy to get rid of the old one. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are often classic features of older homes and can last for many decades. A quick resurfacing restores dull, chipped, or scratched metal baths to look brand new, providing a durable finish. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. Due to the high temperatures involved, vitreous enamel can’t be performed in-situ, and it’s becoming increasingly rare among companies.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. Repairs to chips and dents are included in the resurfacing service with no additional cost. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Ellesmere Port.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. I will sand off the top surface of the bath to take it back to the metal. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. After that, I will apply another layer of bonder on top. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
It usually takes 5-7 hours to resurface or re-enamel a bath. A significant portion of the time is spent masking and protecting all surrounding surfaces to prevent overspray. This is a very important part of the procedure. Any chips or dents in your bath must be repaired first, as the new enamel surface won’t adhere properly if these aren’t fixed. This can sometimes make the process take a bit longer than if there was no damage to fill.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. Re-enamelling your bath will restore it to a like-new appearance and feel.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
I use top-quality materials that guarantee superior results, unlike anything you can achieve with DIY products from a local store. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
How long does a re-enamelled bath last?
The restored surface of your bath will remain in excellent condition for many years. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Give me a call for my expert advice.
2) Kindly send in images of the damage.
3) Your quote will be sent to you immediately.
That’s all there is to it! I can handle all your repair needs in Ellesmere Port.
If you need bath repairs, Surface Doctor Ellesmere Port is one of the leading companies in your area—call me today at 0161 931 9118.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Ellesmere Port and the surrounding areas of Cheshire. Our team is local and ready to help with your repair.
