Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! Here at Surface Doctor Ditton, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Contact me today to discuss how I can help with your bath restoration.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. This is all done in your bathroom so there is no messing with your bath installation or anything like that. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. I take care of filling in chips, scratches, and other repairs so that the final surface is smooth and flawless once the enamel is applied. I offer resurfacing services for cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. I offer a 12-month guarantee on my bath resurfacing services.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. Getting rid of an old bath is not as straightforward as many people think. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are often classic features of older homes and can last for many decades. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. You simply can't just use normal white paint to paint the surface. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. Repairs to chips and dents are included in the resurfacing service with no additional cost. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Ditton.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. At this stage, I will apply a new enamel coating to your bath. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. Give it 24 hours to fully cure, and your bath will be as good as new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. This important step ensures your bathroom remains safe from any accidental overspray. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. This may add some extra time to the procedure if there are repairs needed.
With years of experience in bath resurfacing, I can restore your bath to its original condition. Re-enamelling your bath will restore it to a like-new appearance and feel.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
How durable is bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. All of my work is guaranteed for 12 months for your peace of mind.
1) Call me today for my expert evaluation.
2) Kindly send in images of the damage.
3) Your quote will be sent to you immediately.
It’s that easy! I can assist with all your repair needs in Ditton.
Surface Doctor Ditton is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0345 017 0787
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
