Does your bath need resurfacing or re-enamelling? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! Here at Surface Doctor Cuxton, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. This is all done in your bathroom so there is no messing with your bath installation or anything like that. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. My resurfacing service is suitable for cast-iron, metal, and acrylic baths. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. My bath resurfacing is guaranteed for 12 months.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. It’s not easy to dispose of an old bath, especially depending on its material. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Metal baths are often classic features of older homes and can last for many decades. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. By working in-situ, I minimize disruption to you—only needing one day of work in your bathroom before I’m done. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. There are no extra charges for this step; it’s all part of the resurfacing process. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Cuxton.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. I will then apply another layer of bonder over this. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. Next, I’ll buff the surface to a high shine. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. Protecting the surrounding areas by masking is an important step that takes time to ensure no overspray damages surfaces. It’s essential to protect surrounding surfaces, as overspray could cause damage. Any chips or dents in your bath must be repaired first, as the new enamel surface won’t adhere properly if these aren’t fixed. Repairing any chips and dents can take additional time, but ensures a better outcome.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Re-enamelling your bath will restore it to a like-new appearance and feel.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. I address all chip, crack, and scratch repairs as part of the bath resurfacing process.
Don’t expect to achieve the same outcome by using DIY materials from your local shop; I use only the best materials for the job. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
How long will a bath re-enamelling last?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I’ll show you the best cleaning techniques to maintain the shiny and smooth finish of your bath. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
1) Reach out for my professional opinion.
2) Kindly send in images of the damage.
3) I’ll have your quote sent out to you without delay.
It's that simple! I can help you with all of your repair needs in Cuxton.
Need a bath repair? Surface Doctor Cuxton is a leading hard surface repair company in your area—call me at 0345 017 0787 now.
Count on me for expert bath and sink repairs in your kitchen or bathroom. I’m dedicated to providing the best repairs. Call me today for any questions about what I can fix.
We serve Cuxton and the surrounding areas of Kent. Our team is local and ready to help with your repair.
