Is your bath in need of re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. At Surface Doctor Currie, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. This is all done in your bathroom so there is no messing with your bath installation or anything like that. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. Whether it's a cast-iron, metal, or acrylic bath, I can restore it to a like-new condition. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. I stand behind my bath resurfacing work with a 12-month guarantee.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Cast-iron baths are so heavy that they have to be smashed to pieces before being carried out, which can lead to damage throughout your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are usually original features of older houses, and they will last for decades! Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. You simply can't just use normal white paint to paint the surface. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. There are no extra charges for this step; it’s all part of the resurfacing process. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Currie.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. I will sand off the top surface of the bath to take it back to the metal. 3. I will then apply a layer of our specialized bonder and carefully fill in any chips, cracks, or holes in the bath. 4. Next, I will apply an additional layer of bonder over the surface. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. After waiting 24 hours, your bath will be ready to use and look as good as new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. This important step ensures your bathroom remains safe from any accidental overspray. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. This can sometimes make the process take a bit longer than if there was no damage to fill.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. Once your bath is re-enamelled, it will look and feel just like a new one.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. For over 10 years, I’ve trusted these materials to provide lasting, reliable results with every resurfacing job.
How durable is bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. All of my work is guaranteed for 12 months for your peace of mind.
Check out what my customers are saying about my bath re-enamelling work:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Isabella Foster
Currie, City-of-Edinburgh
Material Type: Cast Iron Bath | Service: Bath Surface Restoration
Amanda Davis
City-of-Edinburgh
Material Type: Enamelled Bath | Service: Bath Surface Re-Enamelling
Courtney Howard
City-of-Edinburgh
Material Type: Acrylic Bath | Service: Roll Top Bath Re-Enamelling
Edith Wallace
City-of-Edinburgh
Material Type: Acrylic Bath | Service: Full Bath Re-Enamelling
1) Reach out for my professional opinion.
2) Please provide pictures of the damage.
3) I’ll send your quote to you right away.
It's that simple! I can help you with all of your repair needs in Currie.
As one of the top hard surface repair companies in Currie, call me now at 0131 278 3890 if you need bath repairs.
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Currie and the surrounding areas of City-of-Edinburgh. Our team is local and ready to help with your repair.
