Does your bath need resurfacing or re-enamelling? When your bath is dull, sticky, or chipped, restoring it completely is the ideal fix. At Surface Doctor Croxley-Green, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. You won’t have to worry about altering your bath installation as the process is done in your bathroom. This high-quality enamel paint hardens in just 24 hours, so you can enjoy your bath again the very next day. As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. I can resurface all cast-iron and metal baths, and also acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. My bath resurfacing is guaranteed for 12 months.
In this day and age, it is so easy to buy something new and throw away the old one rather than trying to have it repaired or restored. Getting rid of an old bath is not as straightforward as many people think. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Traditional metal baths are common in older houses and can last for decades with proper maintenance. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. For individual repairs like chips and scratches, I color match the repair to your bath, but with re-enamelling or resurfacing, I use a fresh white enamel to respray the entire surface.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
There’s no need to remove your bath or deal with complicated transport, as all of my resurfacing work is done in-situ. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. I’m not aware of many companies still offering this in-situ, as the extreme heat needed makes it impossible.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. There are no extra charges for this step; it’s all part of the resurfacing process. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Croxley-Green.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. After that, I will apply another layer of bonder on top. 5. Now it’s time to spray the new enamel surface onto your bath for a flawless finish. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. A significant portion of the time is spent masking and protecting all surrounding surfaces to prevent overspray. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. Repairing any chips and dents can take additional time, but ensures a better outcome.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Re-enamelling your bath will restore it to a like-new appearance and feel.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For over 10 years, I’ve trusted these materials to provide lasting, reliable results with every resurfacing job.
What’s the lifespan of a bath re-enamelling?
Once resurfaced, your bath’s new surface will remain in great condition for years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Call me for my expert opinion.
2) Please send pictures of the damage.
3) I’ll have your quote sent out to you without delay.
It’s that easy! I can assist with all your repair needs in Croxley-Green.
Surface Doctor Croxley-Green is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0345 017 0787
Count on me for expert bath and sink repairs in your kitchen or bathroom. I’m dedicated to providing the best repairs. Call me today for any questions about what I can fix.
