Does your bath need resurfacing or re-enamelling? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! At Surface Doctor Comiston, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Call me today to find out how I can restore your bath.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. You won’t have to worry about altering your bath installation as the process is done in your bathroom. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. My resurfacing service is suitable for cast-iron, metal, and acrylic baths. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. You can trust my bath resurfacing, which comes with a 12-month guarantee.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. Getting rid of an old bath is not as straightforward as many people think. Cast-iron baths are so heavy that they have to be smashed to pieces before being carried out, which can lead to damage throughout your bathroom. Acrylic baths are lighter, making removal easier, but still cause damage to your bathroom when removed. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are usually original features of older houses, and they will last for decades! When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. For individual repairs like chips and scratches, I color match the repair to your bath, but with re-enamelling or resurfacing, I use a fresh white enamel to respray the entire surface.
I use commercial-grade materials to resurface your bath, which are not available to the general public. You simply can't just use normal white paint to paint the surface. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. The specialized bonder I use provides the strongest and most lasting bond for bath resurfacing. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. The repairs for chips and dents are included in the overall process with no hidden charges. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Comiston.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. I will sand off the top surface of the bath to take it back to the metal. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. Now I will spray on the new enamel surface to your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. Masking and protection are vital to ensure no damage occurs to your bathroom. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. If your bath has damage, this extra step can take a bit longer than if no repairs are needed.
My years of experience in bath resurfacing mean I can get your bath looking like it’s just been installed. Re-enamelling your bath will restore it to a like-new appearance and feel.
Resurfacing your bath saves you money, reduces waste, and is a time-efficient, environmentally friendly option. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. I address all chip, crack, and scratch repairs as part of the bath resurfacing process.
I use premium materials that ensure a flawless finish, something you can’t replicate with DIY products from a local store. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
How long does a re-enamelled bath last?
The new surface of your bath will last for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. Every job I do is backed by a 12-month guarantee for your peace of mind.
Discover what clients have said about the bath re-enamelling I’ve carried out:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Lucy Harrison
City-of-Edinburgh
Material Type: Steel Bath | Service: Bath Re-Enamelling & Colour Change
Rachel Taylor
City-of-Edinburgh
Material Type: Enamelled Bath | Service: Bath Surface Re-Enamelling
Samantha Phillips
Comiston, City-of-Edinburgh
Material Type: Cast Iron Bath | Service: Full Bath Re-Enamelling
Ruby Harrison
Comiston, City-of-Edinburgh
Material Type: Roll Top Bath | Service: Bath Re-Enamelling & Colour Change
1) Contact me for my expert insight.
2) Send over pictures of the damage.
3) Your quote will be sent to you immediately.
That’s all there is to it! I can handle all your repair needs in Comiston.
If you need bath repairs, Surface Doctor Comiston is one of the leading companies in your area—call me today at 0131 278 3890.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Comiston and the surrounding areas of City-of-Edinburgh. Our team is local and ready to help with your repair.
