Does your bath need resurfacing or re-enamelling? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Coleshill, we offer professional bath restoration to make your bath look brand new again, with no disruption to your bathroom. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. You won’t have to worry about altering your bath installation as the process is done in your bathroom. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I can resurface all cast-iron and metal baths, and also acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. My bath resurfacing is guaranteed for 12 months.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. Removing an old bath isn’t as simple as it may seem. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Metal baths are a lasting feature of older homes, providing durability for decades. When their surface becomes dull and tired, chipped, scratched, etc, it is so easy to resurface them so they look brand new again and you'll have a perfect and strong bath in no time. Though acrylic baths have a shorter lifespan than metal baths, resurfacing restores them to a like-new condition. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
The materials I use for bath resurfacing are professional-grade, specifically sourced for commercial applications. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. I’ve trusted my preferred materials for years, knowing they consistently produce excellent, high-quality repairs.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel is a unique process where powdered glass is fused to the surface of the bath at extremely high temperatures in a kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
If your bath is severely chipped or dented, I’ll repair these imperfections first to ensure a flawless surface for resurfacing. This is all included in the process and there won't be any extra charges for this. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Coleshill.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Next, I will apply a fresh enamel surface to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
The entire bath re-enamelling or resurfacing process takes around 5-7 hours. One of the steps that takes some time is masking up and protecting all the surfaces around your bath to make sure no overspray gets on anything. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. This can sometimes make the process take a bit longer than if there was no damage to fill.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
What’s the lifespan of a bath re-enamelling?
The new surface of your bath will last for many years. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
1) Contact me for my expert insight.
2) Kindly send in images of the damage.
3) I’ll have your quote sent out to you without delay.
That’s all there is to it! I can handle all your repair needs in Coleshill.
Call Surface Doctor Coleshill for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0121 673 8007.
Count on me for expert bath and sink repairs in your kitchen or bathroom. I’m dedicated to providing the best repairs. Call me today for any questions about what I can fix.
