Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. Surface Doctor Coleraine provides a hassle-free bath restoration service that will make your bath look as good as new. Call me today to find out how I can restore your bath.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I resurface all types of baths including cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Cast-iron baths are so heavy that they have to be smashed to pieces before being carried out, which can lead to damage throughout your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. You'll have to re-do the tiling around the bath, have the taps and waste re-fitted, and potentially get new flooring done. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Many older homes feature metal baths that can last a lifetime with the right care. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. Repairing chips and scratches requires color matching, but with full bath resurfacing or re-enamelling, I apply a new white enamel for a flawless finish.
The materials I use for bath resurfacing are professional-grade, specifically sourced for commercial applications. You simply can't just use normal white paint to paint the surface. A successful resurfacing process involves using an adhesive bonder to securely attach the new surface to the bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
With my in-situ resurfacing service, you don’t need to remove or transport your bath—everything is done in your bathroom. I complete all resurfacing in just one day in your bathroom, ensuring minimal disruption for you. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. Due to the high temperatures involved, vitreous enamel can’t be performed in-situ, and it’s becoming increasingly rare among companies.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. Repairs to chips and dents are included in the resurfacing service with no additional cost. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Coleraine.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. I’ll then proceed to add another layer of bonder to ensure a strong surface bond. 5. Now I will spray on the new enamel surface to your bath. 6. I will then buff this down to make it super shiny. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
It usually takes 5-7 hours to resurface or re-enamel a bath. A significant portion of the time is spent masking and protecting all surrounding surfaces to prevent overspray. This important step ensures your bathroom remains safe from any accidental overspray. If your bath has chips or dents, they must be filled and repaired before resurfacing to ensure a smooth result. This can sometimes make the process take a bit longer than if there was no damage to fill.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! Re-enamelling your bath will restore it to a like-new appearance and feel.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For over 10 years, I’ve trusted these materials to provide lasting, reliable results with every resurfacing job.
How long will a bath re-enamelling last?
Once resurfaced, your bath’s new surface will remain in great condition for years. I’ll show you the best cleaning techniques to maintain the shiny and smooth finish of your bath. All of my work is guaranteed for 12 months for your peace of mind.
Discover what clients have said about the bath re-enamelling I’ve carried out:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Sarah Mitchell
Coleraine, BT52, County-Derry
Material Type: Enamelled Bath | Service: Bath Restoration
Rachel Taylor
Coleraine, County-Derry
Material Type: Roll Top Bath | Service: Bath Chip Repair & Re-Enamelling
Kayla Coleman
Coleraine, County-Derry
Material Type: Steel Bath | Service: Full Bath Re-Enamelling
Beatrice Hayes
Coleraine, County-Derry
Material Type: Acrylic Bath | Service: Bath Re-Enamelling & Colour Change
1) Call me today for my expert evaluation.
2) Please provide pictures of the damage.
3) I’ll make sure your quote is sent to you promptly.
It’s that easy! I can assist with all your repair needs in Coleraine.
If you need bath repairs, Surface Doctor Coleraine is one of the leading companies in your area—call me today at 0289 570 4570.
I'm ready to help you with your bath and sink repairs in your bathroom and kitchen. You can count on me to produce the best repair out there. Call me today if you have any enquiries about what I can repair.
We serve Coleraine and the surrounding areas of County-Derry. Our team is local and ready to help with your repair.
