Does your bath need resurfacing or re-enamelling? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. With Surface Doctor Clacton-On-Sea, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Contact me today to discuss how I can help with your bath restoration.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. No need to change your bath installation, as all work is completed directly in your bathroom. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I resurface all types of baths including cast-iron, metal, and acrylic baths. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. My bath resurfacing is guaranteed for 12 months.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. When it comes to baths, getting rid of the old one isn’t a quick or easy task. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are usually original features of older houses, and they will last for decades! When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Acrylic baths may not last as long as metal baths, but they can still be resurfaced to great effect. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
The materials I use for bath resurfacing are professional-grade, specifically sourced for commercial applications. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I have sourced a very specialised bonder which creates the most lasting results possible. Having used my chosen materials for years, I’m confident they provide the best, most durable resurfacing results.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. By working in-situ, I minimize disruption to you—only needing one day of work in your bathroom before I’m done. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
Before resurfacing, I will first fix any chips and dents to ensure the surface is flat and smooth. There are no extra charges for this step; it’s all part of the resurfacing process. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Clacton-On-Sea.
1. I’ll carefully mask the bathroom and surrounding areas to protect them during the resurfacing process.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. Once the bonder is applied, I’ll proceed to fill any chips, cracks, or holes in the surface. 4. Next, I will apply an additional layer of bonder over the surface. 5. Now I will spray on the new enamel surface to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. This is a very important part of the procedure. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. This may add some extra time to the procedure if there are repairs needed.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use premium materials that ensure a flawless finish, something you can’t replicate with DIY products from a local store. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What is the expected longevity of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Give me a call for my expert advice.
2) Please send pictures of the damage.
3) I'll get your quote sent out to you then and there.
It's that simple! I can help you with all of your repair needs in Clacton-On-Sea.
Surface Doctor Clacton-On-Sea is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0345 017 0787
I’m here to assist with your bath and sink repairs in both your bathroom and kitchen. Trust me to provide the highest quality repairs. Call today if you have questions about what I can repair.
We serve Clacton-On-Sea and the surrounding areas of Essex. Our team is local and ready to help with your repair.
