Do you need bath re-enamelling or bath resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. At Surface Doctor Chepstow, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath resurfacing, or re-enamelling, is the process of spraying a new enamel surface onto your bath, giving it a fresh look. No need to change your bath installation, as all work is completed directly in your bathroom. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! I take care of filling in chips, scratches, and other repairs so that the final surface is smooth and flawless once the enamel is applied. I offer resurfacing services for cast-iron, metal, and acrylic baths. It only takes a day to do this procedure, which is much faster and cheaper than replacing your bath. I stand behind my bath resurfacing work with a 12-month guarantee.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. Removing an old bath isn’t as simple as it may seem. Cast-iron baths are so heavy that they have to be smashed to pieces before being carried out, which can lead to damage throughout your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. By restoring your bath, you’re choosing an environmentally responsible option, reducing construction waste. Traditional metal baths are common in older houses and can last for decades with proper maintenance. When a metal bath shows signs of wear, resurfacing is a quick and effective way to restore it to its original condition. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
I use commercial-grade materials to resurface your bath, which are not available to the general public. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. A key step of successful resurfacing is using an adhesive bonder to bond the new surface to your original bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. My in-situ resurfacing allows me to complete the job within a day, so you’ll be back to normal quickly. Vitreous enamel is a specialized technique in which powdered glass is fused onto your bath at high temperatures in a kiln. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. This is all included in the process and there won't be any extra charges for this. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Chepstow.
1. To prepare for the procedure, I will thoroughly mask the bathroom and all areas around your bath.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. I then will apply a layer of our special bonder and then fill in any holes, chips, cracks, etc. 4. After that, I will apply another layer of bonder on top. 5. Next, I will apply a fresh enamel surface to your bath. 6. Next, I’ll buff the surface to a high shine. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
It usually takes 5-7 hours to resurface or re-enamel a bath. A significant portion of the time is spent masking and protecting all surrounding surfaces to prevent overspray. This step is crucial to ensure the surrounding areas remain undamaged. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I have been resurfacing baths for many years, so I will be able to get your bath looking brand new again! Once your bath is re-enamelled, it will look and feel just like a new one.
Having your bath resurfaced instead of replacing it will save you money, time, and is environmentally friendly. By restoring your bath, you’re reducing waste and avoiding adding more to your local landfill. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. I’ve been working with these materials for over 10 years, ensuring consistent and durable outcomes every time.
What’s the lifespan of a bath re-enamelling?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I will go over with you the best way to clean it to also ensure the surface stays as shiny and smooth as possible. Every job I do is backed by a 12-month guarantee for your peace of mind.
1) Reach out for my professional opinion.
2) Please provide pictures of the damage.
3) I’ll send your quote to you right away.
That’s all there is to it! I can handle all your repair needs in Chepstow.
Surface Doctor Chepstow is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0121 673 8007
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Chepstow and the surrounding areas of Monmouthshire. Our team is local and ready to help with your repair.
