Are you looking for bath re-enamelling or resurfacing? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. Here at Surface Doctor Cannock, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Get in touch now to see how I can help restore your bath.
Re-enamelling a bath, also known as resurfacing, involves applying a new enamel coating, restoring the bath to its original shine. This is all done in your bathroom so there is no messing with your bath installation or anything like that. The enamel I apply fully cures within 24 hours, so your bath will be ready to use by the next day. During re-enamelling, I’ll fix any chips or scratches so the new enamel will create a smooth, perfect surface. My resurfacing service is suitable for cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. Removing an old bath isn’t as simple as it may seem. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Many older homes feature metal baths that can last a lifetime with the right care. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. With acrylic baths, their lifespan is not as long as traditional metal baths but they are still able to be resurfaced to a great result. When fixing chips and scratches, I match the color to your bath’s surface, but for re-enamelling or resurfacing, I use a new white enamel finish.
I use commercial-grade materials to resurface your bath, which are not available to the general public. You simply can't just use normal white paint to paint the surface. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. I’ve sourced a unique bonder that ensures the resurfaced surface lasts longer and stays durable. I’ve trusted my preferred materials for years, knowing they consistently produce excellent, high-quality repairs.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. By working in-situ, I minimize disruption to you—only needing one day of work in your bathroom before I’m done. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. This service could never be offered in-situ due to the extreme heat involved and I don't know of many companies that are able to offer this any more for baths.
When your bath is badly chipped or dented, I’ll repair these areas first to ensure a smooth and even surface before resurfacing. The repairs for chips and dents are included in the overall process with no hidden charges. There aren't many baths that I can't resurface, so give me a call today to find out if I can restore your bath for you in Cannock.
1. I begin by masking up the bathroom and surrounding areas to prevent any damage during the procedure.
2. I will sand off the top surface of the bath to take it back to the metal. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. I will then apply another layer of bonder over this. 5. Next, I will apply a fresh enamel surface to your bath. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. You’ll need to wait 24 hours before using your bath, and it will be as good as new!
Typically, re-enamelling or resurfacing a bath takes between 5 and 7 hours. Protecting the surrounding areas by masking is an important step that takes time to ensure no overspray damages surfaces. Masking and protection are vital to ensure no damage occurs to your bathroom. Any chips or dents in your bath must be repaired first, as the new enamel surface won’t adhere properly if these aren’t fixed. This can sometimes make the process take a bit longer than if there was no damage to fill.
With years of experience in bath resurfacing, I can restore your bath to its original condition. After having your bath re-enamelled, it will look brand new and feel completely refreshed.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. Choosing to repair and restore your bath means you're contributing less to landfill waste. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What’s the lifespan of a bath re-enamelling?
After resurfacing, your bath will have a lasting, smooth, and shiny finish for years. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. For your peace of mind, all of my work comes with a 12-month guarantee.
1) Call me today for my expert evaluation.
2) Send over pictures of the damage.
3) I’ll make sure your quote is sent to you promptly.
That’s how easy it is! I can support you with all your repair needs in Cannock.
If you need bath repairs, Surface Doctor Cannock is one of the leading companies in your area—call me today at 0121 673 8007.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Cannock and the surrounding areas of Staffordshire. Our team is local and ready to help with your repair.
