Does your bath need resurfacing or re-enamelling? If your bath looks worn, sticky, or chipped, a full restoration is the best approach. Here at Surface Doctor Blaydon, I can restore your bath for you so it looks brand new again without causing any disruption to your bathroom. Give me a call now to see if I can help you with your bath.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. The re-enamelling is performed right in your bathroom, avoiding any need to alter your bath setup. I use a special enamel paint which hardens and fully cures within 24 hours so you can use your bath again the next day! I’ll also take care of any chip or scratch repairs as part of the process, ensuring a smooth, flawless surface before the new enamel is sprayed. I resurface all types of baths including cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. My bath resurfacing services are backed by a 12-month guarantee for peace of mind.
These days, it’s common to discard old items and buy new ones, but with baths, it’s not always that simple. Removing an old bath isn’t as simple as it may seem. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Restoring your bath instead of replacing it helps cut down on daily construction waste, making it a more sustainable option. Traditional metal baths are common in older houses and can last for decades with proper maintenance. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
I use commercial-grade materials to resurface your bath, which are not available to the general public. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. I have sourced a very specialised bonder which creates the most lasting results possible. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
All resurfacing is done directly in your bathroom, so you won’t have to remove your bath and deal with the hassle of transport and reinstallation. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. You may have heard of Vitreous enamel - this is a specialised procedure where the bath is coated in a powdered glass material and then this is fused onto the surface of your bath in a large kiln at very high temperatures. Vitreous enamel resurfacing requires extreme heat, which means it can’t be done in-situ and is rarely offered by companies now.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. You won’t incur extra costs for this step—it’s included in the resurfacing service. With only a few exceptions, I can resurface almost any bath—call me today to find out if I can restore yours in Blaydon.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Next, I will apply an additional layer of bonder over the surface. 5. At this stage, I will apply a new enamel coating to your bath. 6. After spraying, I’ll buff the enamel to achieve a flawless shine. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. Masking and protection are vital to ensure no damage occurs to your bathroom. Any chips or dents in your bath must be repaired first, as the new enamel surface won’t adhere properly if these aren’t fixed. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
I’ve been resurfacing baths for years, so I know exactly how to bring your bath back to life and make it look like new. Re-enamelling your bath will restore it to a like-new appearance and feel.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. You won't be adding more wastage to your local landfill site when you choose to repair and restore your bath. Any chips, cracks, or scratches will be repaired during the resurfacing process to ensure a flawless result.
Don’t expect to achieve the same outcome by using DIY materials from your local shop; I use only the best materials for the job. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
What’s the lifespan of a bath re-enamelling?
The newly resurfaced surface will stay durable and shiny for many years to come. To keep the surface looking great, I’ll share the best cleaning methods to preserve its shine and smoothness. I provide a 12-month guarantee on all of my work, ensuring your satisfaction.
1) Call me for my expert opinion.
2) Please provide pictures of the damage.
3) I’ll send your quote to you right away.
It’s that easy! I can assist with all your repair needs in Blaydon.
Need a bath repair? Surface Doctor Blaydon is a leading hard surface repair company in your area—call me at 0161 931 9118 now.
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
