Do you need bath re-enamelling or bath resurfacing? If your bath surface is dull, sticky, or has several chips, restoring the entire surface is the best solution. Surface Doctor Blackwood provides a hassle-free bath restoration service that will make your bath look as good as new. Get in touch now to see how I can help restore your bath.
Bath re-enamelling, or resurfacing, involves spraying a fresh surface onto your bath, restoring its original appearance. You won’t have to worry about altering your bath installation as the process is done in your bathroom. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I resurface all types of baths including cast-iron, metal, and acrylic baths. In just a single day, your bath will be resurfaced, providing a quicker and more economical solution than full replacement. I offer a 12-month guarantee on my bath resurfacing services.
In today’s world, replacing items with new ones is easy, but when it comes to baths, it’s not as straightforward. Getting rid of an old bath is not as straightforward as many people think. Removing cast-iron baths involves breaking them down due to their weight, leading to potential damage to the rest of your bathroom. Acrylic baths are lighter and easier to move, but removing them can still damage your bathroom. Removing the bath means you’ll have to replace the tiling, reinstall taps and waste, and maybe even redo the flooring. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Traditional metal baths are common in older houses and can last for decades with proper maintenance. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. Though acrylic baths have a shorter lifespan than metal baths, resurfacing restores them to a like-new condition. For individual repairs like chips and scratches, I color match the repair to your bath, but with re-enamelling or resurfacing, I use a fresh white enamel to respray the entire surface.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. Regular paint won’t do the job for bath resurfacing; the right materials are essential for success. The use of an adhesive bonder is critical in resurfacing to create a solid bond between the new layer and the original bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. The materials I use have been trusted by me for years, and they provide unmatched results in bath resurfacing.
I complete all resurfacing work in-situ, so there’s no need to remove and transport your bath for repair. This way there is minimal disruption to you as I will only need to be working in your bathroom for a day before I'm out of your hair again. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. This is all included in the process and there won't be any extra charges for this. I can resurface most baths, so contact me today to see if I can restore yours in Blackwood.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. Step 2: I will carefully sand off the top layer of the bath, revealing the underlying metal surface. 3. After applying our special bonder, I will fill in any holes, chips, or cracks that need attention. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. At this stage, I will apply a new enamel coating to your bath. 6. The next step is to buff the surface, ensuring it has a smooth, shiny finish. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
On average, re-enamelling or resurfacing your bath will take 5-7 hours. The masking process to protect surrounding areas from overspray is one of the steps that can take a bit of time. This is a very important part of the procedure. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. If there’s damage to repair, it can extend the process slightly compared to a bath without damage.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Re-enamelling your bath will restore it to a like-new appearance and feel.
Choosing to resurface your bath rather than replace it is a cost-effective, time-saving, and environmentally conscious decision. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. I can handle any chip repairs, crack repairs, and scratch repairs needed as part of the resurfacing.
Don’t expect to achieve the same outcome by using DIY materials from your local shop; I use only the best materials for the job. I have been using the same materials for the last 10 years, so I know that they work every time and will produce a lasting result.
How long does a re-enamelled bath last?
The new surface of your bath will last for many years. I’ll explain how to clean and care for the surface to maintain its flawless shine and smooth texture. All of my work is guaranteed for 12 months for your peace of mind.
1) Give me a call for my expert advice.
2) Please send pictures of the damage.
3) I’ll make sure your quote is sent to you promptly.
It's that simple! I can help you with all of your repair needs in Blackwood.
Call Surface Doctor Blackwood for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0121 673 8007.
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Blackwood and the surrounding areas of Caerphilly. Our team is local and ready to help with your repair.
