Is your bath showing signs of wear and tear, needing re-enamelling or resurfacing? When you notice your bath is looking dull, sticky, or has chips, resurfacing the entire surface is recommended. At Surface Doctor Blackburn, we specialize in restoring your bath to its original condition, with minimal disruption to your bathroom. Call me today to find out how I can restore your bath.
With bath re-enamelling (or resurfacing), we apply a new surface to your bath, making it look brand new once again. You won’t have to worry about altering your bath installation as the process is done in your bathroom. Using a unique enamel paint, it hardens and cures within 24 hours, allowing you to use your bath the next day. When I re-enamel a bath, as part of the process I will fill in any chip repairs, scratch repairs, etc., that need to be done so that when the new enamel is sprayed on, the surface will be smooth again. I offer resurfacing services for cast-iron, metal, and acrylic baths. This procedure is completed in one day, offering a faster and more budget-friendly alternative to replacing your bath. You can trust my bath resurfacing, which comes with a 12-month guarantee.
In today’s consumer culture, we often choose to replace over repair, but when it comes to baths, it’s not so easy. Removing an old bath isn’t as simple as it may seem. With cast-iron baths, the removal process requires breaking them apart due to their weight, causing damage to your bathroom’s structure. Even with lighter acrylic baths, removal can lead to damage to the rest of your bathroom. Removing your bath means redoing the tiling, refitting taps, and possibly replacing flooring, making it a costly and disruptive process. Restoring your bath is the most eco-friendly choice, preventing the additional waste generated from removing and replacing it. Metal baths are often classic features of older homes and can last for many decades. Resurfacing is a simple and effective solution for worn, chipped, or scratched metal baths, making them look new and strong again. While acrylic baths have a shorter lifespan than metal baths, resurfacing them gives great results. With individual repairs, I match the paint to your bath’s surface, but when resurfacing or re-enamelling, I apply a brilliant white enamel to the whole surface.
I only use top-grade materials, exclusively available for commercial use, to resurface your bath. It’s impossible to use ordinary white paint for resurfacing your bath; it requires specialized materials. One of the crucial steps for effective resurfacing is applying an adhesive bonder to attach the new surface to your original bath. The bonder I use is specifically sourced to guarantee the best, long-lasting outcomes. For years, I’ve been using these proven materials, which consistently create the highest standard of bath repairs.
With my in-situ resurfacing service, you don’t need to remove or transport your bath—everything is done in your bathroom. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. Vitreous enamel involves coating your bath in powdered glass and fusing it onto the surface using a kiln at high temperatures. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath is badly chipped and dented, I will repair this first to ensure the surface is smooth and flat before resurfacing it. Repairs to chips and dents are included in the resurfacing service with no additional cost. Most baths are suitable for resurfacing, so give me a call today to learn if I can restore your bath in Blackburn.
1. I will mask up the bathroom and areas surrounding your bath thoroughly to prepare them for the procedure.
2. The next step is to sand off the bath’s top surface, exposing the metal for resurfacing. 3. I will then apply a layer of our specialized bonder and carefully fill in any chips, cracks, or holes in the bath. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Now I will spray on the new enamel surface to your bath. 6. I will proceed to buff the surface, giving it a glossy, smooth finish. 7. After waiting 24 hours, your bath will be ready to use and look as good as new!
It usually takes 5-7 hours to resurface or re-enamel a bath. A key part of the procedure is masking the bathroom to protect surfaces from overspray, which does take some time. This important step ensures your bathroom remains safe from any accidental overspray. If there are chips or dents in your bath, these need to be filled before resurfacing for the best possible results. Repairing any chips and dents can take additional time, but ensures a better outcome.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Once your bath is re-enamelled, it will look and feel just like a new one.
Resurfacing your bath instead of replacing it can save you money and time, and it’s a more eco-friendly choice. Restoring your bath helps minimize environmental impact by preventing additional waste in landfills. As part of the resurfacing process, I’ll take care of any chips, cracks, or scratches.
The materials I use are of the highest quality, which you won’t find at your local DIY store for DIY bath painting. Having used these materials for the last decade, I can confidently say they consistently produce the best, lasting results.
How durable is bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. I’ll show you the best cleaning techniques to maintain the shiny and smooth finish of your bath. Every job I do is backed by a 12-month guarantee for your peace of mind.
See what some of my customers have to say about my bath re-enamelling services:
★★★★★
4.9/5 Average Rating
1000'S
Verified Reviews
98%
Would Recommend
Abigail Carter
Lancashire
Material Type: Acrylic Bath | Service: Bath Re-Enamelling
Amanda Davis
Blackburn, BB1, Lancashire
Material Type: Cast Iron Bath | Service: Bath Re-Enamelling
Samantha Phillips
Blackburn, Lancashire
Material Type: Steel Bath | Service: Bath Re-Enamelling
Violet Brooks
Blackburn, Lancashire
Material Type: Steel Bath | Service: Bath Re-Enamelling
1) Call me today for my expert evaluation.
2) Send over pictures of the damage.
3) I’ll have your quote sent out to you without delay.
It's that simple! I can help you with all of your repair needs in Blackburn.
Surface Doctor Blackburn is one of the leading hard surface repair companies in your area, so if you need a bath repair call me now on 0161 931 9118
If you need bath and sink repairs in your bathroom or kitchen, I’m ready to help. You can rely on me to deliver the best repair. Reach out today if you have any questions about my services.
We serve Blackburn and the surrounding areas of Lancashire. Our team is local and ready to help with your repair.
