Do you need bath re-enamelling or bath resurfacing? When the surface of your bath looks dull, is sticky, or has multiple chips on it, the best thing to do is to restore the whole surface! With Surface Doctor Barrhead, your bath can be restored to a brand-new condition without the mess or hassle of a full replacement. Give me a call now to learn more about how I can restore your bath to its best condition.
Bath re-enamelling, also known as bath resurfacing, is where a new surface is sprayed onto your bath so your bath looks brand new again. No need to change your bath installation, as all work is completed directly in your bathroom. The enamel I apply fully cures within 24 hours, so your bath will be ready to use by the next day. As part of the re-enamelling process, I repair any chips or scratches to ensure a smooth finish when the new enamel is applied. I offer resurfacing services for cast-iron, metal, and acrylic baths. This quick and cost-effective procedure only takes a day, saving you both time and money compared to a full bath replacement. You can trust my bath resurfacing, which comes with a 12-month guarantee.
It’s become second nature to replace old items with new ones, but with baths, the process of removal and replacement is far more complicated. Removing an old bath isn’t as simple as it may seem. Cast-iron baths weigh a ton and have to be smashed apart to be able to carry the pieces out of your house, and this obviously causes damage to the rest of your bathroom. Although acrylic baths are easier to remove, the process still causes damage to surrounding areas in your bathroom. Once removed, you’ll need to re-tile around the bath, refit taps and drains, and possibly replace flooring. Opting to restore your bath helps you avoid contributing to the large amount of construction waste produced every day. Traditional metal baths are common in older houses and can last for decades with proper maintenance. When the surface of metal baths gets worn, chipped, or scratched, resurfacing makes them look brand new again, restoring strength and beauty. Acrylic baths might not last as long as metal ones, but resurfacing them still provides impressive results. When I repair individual chips and scratches on baths I have to colour match the repair to the surface of your bath, but with bath re-enamelling or bath resurfacing as I am respraying the whole surface I just use a new brilliant white enamel paint.
For resurfacing your bath, I rely on high-quality, professional materials that are reserved for commercial use. Resurfacing a bath requires more than just white paint—it involves specific materials designed for the task. To ensure proper resurfacing, I use an adhesive bonder that bonds the new surface firmly to the original bath. I use a highly specialized bonder that ensures the most durable and lasting results for your bath. I have been using my preferred materials for many years so I know that they work and create the highest standard of repairs.
All of my resurfacing work is done in-situ, so you will never have to remove your bath and transport it to me, then have it delivered back and installed again. Since I work in-situ, the entire resurfacing process is completed in just one day, causing minimal disruption to your day-to-day life. You may be familiar with Vitreous enamel, a specialized process where powdered glass is fused to the bath’s surface in a high-temperature kiln. Due to the extreme heat required, this service can’t be done in-situ, and few companies offer it these days.
If your bath has significant chips or dents, I’ll handle the repairs to make sure the surface is even and smooth before the resurfacing process. There are no extra charges for this step; it’s all part of the resurfacing process. I can resurface most baths, so contact me today to see if I can restore yours in Barrhead.
1. First, I will mask the bathroom and surrounding areas to ensure they are fully protected during the process.
2. Next, I will sand the bath’s surface to remove the old finish and expose the metal underneath. 3. Next, I will apply a layer of our unique bonder and fill in any chips, holes, cracks, or other imperfections. 4. Following this, I will apply an extra layer of bonder to strengthen the surface. 5. Now I will spray on the new enamel surface to your bath. 6. Next, I’ll buff the surface to a high shine. 7. Allow 24 hours for the surface to cure before using your bath, and it will look brand new!
Re-enamelling or resurfacing a bath will take about 5-7 hours to complete. A significant portion of the time is spent masking and protecting all surrounding surfaces to prevent overspray. It’s essential to protect surrounding surfaces, as overspray could cause damage. If your bath has lots of chips and dents then these also have to be filled in and repaired before the new enamel surface is sprayed on as you won't get a good result if the bath isn't repaired first. This may add some extra time to the procedure if there are repairs needed.
Having resurfaced baths for many years, I have the expertise to make your bath look brand new again. Re-enamelling will give your bath a fresh, new look and feel, making it look like new again.
Opting for bath resurfacing over replacement saves both time and money, while being better for the environment. Resurfacing your bath helps keep waste out of landfills, offering an eco-friendly alternative to replacement. I repair chips, cracks, and scratches as part of the resurfacing process, ensuring a smooth finish.
I use the highest quality materials available, so don't think you can get the same result as me by painting your bath yourself with something from your local DIY shop. For the last 10 years, I’ve been using the same high-quality materials that deliver reliable, long-lasting results.
What’s the lifespan of a bath re-enamelling?
The restored surface of your bath will remain in excellent condition for many years. I’ll provide guidance on how to clean the surface, keeping it as shiny and smooth as possible. Rest assured, all of my work is guaranteed for 12 months, offering you complete peace of mind.
1) Call me for my expert opinion.
2) Send over pictures of the damage.
3) Your quote will be sent to you immediately.
That’s all there is to it! I can handle all your repair needs in Barrhead.
Call Surface Doctor Barrhead for expert bath repairs! We're a top hard surface repair company in your area—reach me at 0131 278 3890.
Ready to help with your bath and sink repairs in the bathroom or kitchen. You can trust me to offer top-quality repairs. Call me today for any inquiries about what I can repair.
